10 Common Dpms Oracle 308 Problems (Fixes Added)

Hi dear visitor welcome to our blog. 

DPMS Oracle 308 is one of the best brands in the world of guns. 

But some people face problems with this model. 

In this guide, we explain 15 common problems of this model with unique solutions. So let’s start now.

Dpms Oracle 308 Problems

Dpms Oracle 308 Problems

The DPMS Oracle .308 is generally well-regarded for its reliability and performance but like any firearm, it can present its own set of challenges.

Some users have reported issues with the gun’s gas system, specifically over-gassing, leading to excessive recoil. Others have experienced occasional feeding issues with certain types of ammunition.

It’s always advisable to properly maintain and clean the firearm and use high-quality ammunition to mitigate these issues.

1. Erratic Ejection Pattern


An erratic ejection pattern in the DPMS Oracle 308 is often a result of inconsistent bolt operation, which can be due to a variety of factors including poor lubrication, worn-out components, or incorrect buffer and spring assembly. 

Poor maintenance practices and incorrect assembly are common causes of erratic ejection patterns.


To rectify this issue, first ensure that the rifle is properly lubricated and all components are in good working condition. 

If this doesn’t solve the problem, you may need to replace the buffer and spring assembly with one that matches the specifications of the DPMS Oracle 308. 

Regular cleaning, correct assembly, and the use of quality parts are crucial to maintaining a consistent ejection pattern.

2. Inconsistent Feed Mechanism


The inconsistent feed mechanism is often caused by wear and tear of machine components, improper calibration, or a lack of regular maintenance

These factors can result in uneven material feed, disrupting the entire production process and leading to substandard product quality.


The solution to this issue involves regular inspection and maintenance of machinery to ensure all components are functioning at optimal levels. 

It’s equally important to establish a routine calibration process to maintain consistent feed rates. 

Finally, replacing worn-out components at the earliest can prevent significant inconsistencies in the feed mechanism.

3. Difficulty in Bolt Catch Release


The most common cause of difficulty in bolt catch release typically stems from the accumulation of dirt, grime, or rust within the mechanism. 

Lack of regular maintenance can lead to these impurities hindering the smooth operation of the bolt catch release. 

Regular cleaning and maintenance of the firearm are essential to prevent this from happening.


The solution to such a problem is straightforward but requires diligence. 

Initially, a thorough cleaning of the bolt catch mechanism using an appropriate cleaning solution can remove any impurities causing the friction. 

Thereafter, regular maintenance, which includes cleaning and oiling the bolt catch release post usage, can help prevent the recurrence of the issue. 

The use of a high-quality lubricant is recommended for smooth operation.

4. Inadequate Gas System


The primary cause of an inadequate gas system is typically outdated or poorly maintained infrastructure. 

Gas lines may corrode or become blocked over time, leading to leaks or inefficiencies in delivery. 

This can cause significant problems like gas leaks, inefficient energy use, and potential safety hazards.


The solution to an inadequate gas system is twofold: regular maintenance and system upgrades. 

Regular inspections and maintenance can identify issues early on and rectify them before they become problematic. 

However, in many cases, it may be necessary to upgrade the gas system with more modern, efficient equipment. 

System upgrades not only improve efficiency and safety but also make the gas system more eco-friendly and cost-effective in the long run.

5. Failure to Fire


“Failure to Fire” in firearms is often due to a malfunction in the ignition system, where the trigger pull does not result in the firing of the round. 

This could be caused by a variety of issues such as a faulty firing pin, a defective primer, or the absence of ammunition. 

A common cause is a light strike, where the firing pin does not hit the primer hard enough to ignite the propellant.


The solution to “Failure to Fire” is dependent on the exact cause. Regular cleaning and maintenance of the firearm can prevent many common causes. 

If the issue is a defective primer or ammunition, using high-quality ammunition can solve the problem. If the issue persists, it may require professional inspection and service. 

Do not attempt to fire a gun that consistently fails to fire as it may lead to a dangerous situation like a hangfire or a squib load.

6. Loose Handguard


The primary cause of a loose handguard often stems from improper installation or extended use. Over time, the wear and tear from regular use can cause the handguard to loosen. 

Furthermore, if the handguard is not installed correctly, it may not fit snugly onto the rifle, leading to instability.


The solution to a loose handguard is two-fold: inspection and replacement. You must first inspect the handguard and the rifle to ensure there are no damages causing the looseness. 

If inspection reveals no significant damages, the handguard may need to be tightened or reinstalled. 

In cases where the handguard is severely damaged, replacement with a new handguard would be the best solution.

7. Premature Wear and Tear


Premature wear and tear often result from prolonged and heavy usage of machinery, inadequate maintenance, or even misuse. 

It can significantly reduce the lifespan of the equipment, thus leading to frequent replacements and increased costs. 

Essential factors contributing to premature wear include improper lubrication, overloading, and environmental factors like dust and temperature extremes.


The solution to premature wear and tear lies in proactive maintenance and proper usage. 

Regular inspections, appropriate lubrication, and adherence to the manufacturer’s guidelines for operation can significantly slow the wear process. 

Implementing a comprehensive preventive maintenance program, educating operators on correct use, and maintaining a clean operating environment can remarkably prolong the life of machinery.

8. Complicated Disassembly


When it comes to “Complicated Disassembly“, one of the most common causes is the intricate design and alignment of components within a product or machinery. 

Often, manufacturers construct devices with multiple interlocking parts and subcomponents, which can be difficult to disassemble without the correct knowledge, tools, or guidance. 

The complexity increases when these components are minutely entwined or embedded, making them challenging to disentangle without causing potential damage.


The solution to ‘Complicated Disassembly‘ lies in offering clear and comprehensive disassembly instructions, along with the use of appropriate tools. 

Manufacturers should consider designing their products with disassembly in mind, using modular components that can be easily separated and reassembled. 

Providing detailed, step-by-step instructions, possibly enhanced with video or 3D imagery, can dramatically ease the disassembly process. 

Proper training can also underscore the importance of careful and methodical approaches to disassembly, reducing the risk of damage or mishandling.

9. Stock Buffer Tube Issues


The most common cause of issues with the stock buffer tube is improper installation. This can be due to misalignment, incorrect parts, or over-tightening. 

Misalignment can damage the buffer tube and affect the performance of the gun. Using incorrect parts not suitable for your specific model can also lead to problems. 

Moreover, over-tightening the buffer tube can cause excessive stress, resulting in cracks or breaks.


To resolve these issues, ensure proper alignment during installation and use only the correct parts for your specific gun model. It’s crucial to follow the manufacturer’s guidelines when installing the buffer tube. 

If you suspect that the tube is over-tightened, loosen it slightly to see if this resolves the issue. If cracks or breaks are present, the buffer tube will need to be replaced

Always remember, that the right tools and the correct technique are the keys to preventing stock buffer tube issues.

10. Unreliable Accuracy


The root causes of unreliable accuracy often lie in flawed data collection methods, inaccurate data entry, and substandard data management tools. 

Particularly in complex systems, errors can slip through various stages of data handling. 

High-quality data is foundational to accurate insights; without it, decisions based on the output may be misguided.


To enhance accuracy, organizations must invest in robust data quality measures, including reliable data collection tools, comprehensive data cleaning procedures, and meticulous data validation processes. 

The implementation of automation can significantly reduce human error, while continuous monitoring and regular audits can further verify data accuracy. 

Moreover, fostering a data-conscious culture where every team member takes responsibility for data integrity is essential. 

In essence, maintaining data accuracy is not a one-time effort but a continuous process that requires diligence and commitment.


A thorough understanding and application of the points discussed in this document can significantly enhance the overall effectiveness of the associated process. 

The understanding of these principles and their execution is not an overnight task but requires consistent effort, openness to learning, and adaptation. 

Success lies in balancing these critical aspects and applying them judiciously to meet specific needs and objectives. 

As we move forward in this journey, we must remind ourselves to be patient and persistent, as true mastery comes not from rushing, but from steady progress and continual learning.


Is DPMS 308 a good gun?

Yes, DPMS 308 is a reliable and durable gun, well-regarded for its performance and value.

Is DPMS a good gun?

Yes, DPMS firearms are known for their quality construction and dependable performance.

Is DPMS Panther a good brand?

Yes, DPMS Panther is a respected brand with a reputation for producing high-quality firearms.

Is DPMS high or low profile?

DPMS offers both high and low-profile options, so you can choose based on your specific needs and preferences.

Glock 19X Problems

Glock 19 Gen 5 Problems

Glock 27 Gen 4 Problems

HK vp9sk Problems

HK VP40 Problems

HK p30sk Problems

Rossi Rio Bravo Problems

Charles Daly 1911 Problems

Rock Island M206 Problems

Walther Pdp Problems

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top