15 Common Savage 110 Storm Problems (With Fixes!)

Savage 110 Storm is a very special gun for hunting. 

Like any expensive thing, this gun also has some problems which we will discuss with you Some main problems and solutions for our Savage 110 Storm and how can we fix these problems so let’s start now

Savage 110 Storm Problems

Savage 110 Storm Problems

The Savage 110 Storm is a highly-acclaimed firearm, but it’s not without its issues. Some users have reported problems with the rifle’s AccuTrigger, finding it overly sensitive.

Further, others have faced difficulties with the bolt operation, citing occasional stiffness. Proper maintenance and timely servicing are typically effective at overcoming these issues.

1 . Inconsistent Bolt Operation


One common issue behind inconsistent bolt operation in the Savage 110 Storm is improper lubrication. The bolt’s operation relies on a smooth, friction-free motion which can be hindered if there isn’t enough lubrication. 

Another potential cause could be accumulated grime or debris within the bolt assembly, which can create a rough and inconsistent bolt cycle.

Take note of the importance of regular cleaning and lubrication for your firearm. 

Neglecting these maintenance steps can lead to operational issues like inconsistent bolt operation. Bolt assembly must be kept free from grime or debris.


Addressing this problem involves two key steps: thorough cleaning and proper lubrication. Begin by disassembling the bolt, then use a quality gun-cleaning solution to remove any dirt or grime. 

Once cleaned, ensure that you lubricate the bolt assembly properly with a gun-specific lubricant before reassembling. Regular maintenance should help keep your bolt operation smooth and consistent.

A thorough cleaning and proper lubrication of the bolt are crucial in resolving operational inconsistencies.

Use quality gun cleaning and lubricant solutions. Regular maintenance is key to a smooth and consistent bolt operation.

2 . Difficulty in Ejecting Shells


The most common cause of difficulty in ejecting shells is typically related to the extractor or ejector components. Either of these parts may be worn out, broken, or dirty, impeding the smooth ejection of shells. The ejector spring might also lose its tension over time, contributing to the problem.

Key Takeaway: Problems with the extractor or ejector, including wear and tear, breakage, or dirt buildup, are common causes of difficulty in ejecting shells.


The solution to this problem relies on regular maintenance and inspection of your firearm. 

If the extractor or ejector is dirty, a thorough cleaning should be the first step. If these parts are worn out or broken, they will need to be replaced. In the case of a weak ejector spring, replacing the spring should resolve the issue.

Key Takeaway: Regular cleaning and maintenance, as well as replacing worn-out or broken parts, are the main solutions to issues with shell ejection.

3 . Misfire Incidents


Misfires in the Savage 110 Storm can often be attributed to problems with the firing pin, or issues with the ammunition.

 Dirty or damaged firing pins can prevent the gun from firing correctly. Similarly, subpar or old ammunition can fail to ignite, causing a misfire.

Key takeaways: Misfires can be caused by issues with the firing pin or the ammunition used.


Resolving the misfire problem involves cleaning or replacing the firing pin, depending on its condition. Regular maintenance can prevent dirt build-up and subsequent misfires.

 Also, using good quality and fresh ammunition can drastically reduce the chances of misfires.

Key takeaways: Regular maintenance of the firing pin and the use of good-quality ammunition can prevent misfires.

4 . Poor Accuracy


The most common cause of poor accuracy in the Savage 110 Storm could be attributed to a misaligned scope, improper ammunition, or a lack of regular cleaning. Over time, these factors can significantly affect the rifle’s performance. The key to maintaining accuracy lies in regular inspection and timely maintenance of your firearm.


To rectify the issue of poor accuracy, ensure the scope is properly aligned and use the right ammunition for your rifle. 

Regular cleaning and maintenance can also help. If these solutions don’t rectify the issue, it may be worth considering a professional gunsmith’s services. Remember, a well-maintained rifle is the first step toward ensuring optimal performance and accuracy.

5 . Difficult Magazine Insertion


The primary cause for difficult magazine insertion in a Savage 110 Storm often relates to improper alignment or accumulated dirt within the magazine well. 

Over time, misuse or lack of maintenance can lead to wear and tear or buildup of grime, making the magazine hard to insert.


The solution involves regular and proper cleaning of the magazine well to remove any dirt. It is also important to ensure that the magazine is correctly aligned before insertion.

 Using a light source to inspect the well can help identify any obstructions. 

Regular maintenance, proper cleaning, and careful handling are simple yet effective ways to alleviate this issue.

6 . Trigger Reset Issues


The common cause of trigger reset issues in the Savage 110 Storm is typically associated with the excessive buildup of dirt, debris, and fouling in the trigger assembly. 

Regular use and exposure to harsh environments can lead to this accumulation, which interferes with the proper functioning of the trigger mechanism.

 Failure in regular maintenance and cleaning of the firearm can aggravate this problem.


The most effective solution for trigger reset issues involves disassembling and thoroughly cleaning the trigger assembly to remove the buildup.

 For this, you can use a gun cleaning solvent and a brush to gently clean all the parts. Post-cleaning, ensure all parts are dry before reassembling. It’s pivotal to maintain a regular cleaning and maintenance schedule to prevent future trigger reset issues. 

Regular inspections for possible wear and tear are also recommended. Replacement of parts, if necessary, should be done by a certified gunsmith.

7 . Heavy Recoil


The Savage 110 Storm’s heavy recoil can be attributed primarily to its lightweight design and powerful .338 caliber chambering. 

This combination results in a significant kick upon firing, which can not only negatively impact accuracy but also lead to shooter discomfort if not managed properly.

The recoil becomes even more noticeable when using heavy grain ammunition or when shooting from unsupported positions.


A practical solution to mitigate the heavy recoil would be the use of a quality recoil pad and a muzzle brake. 

The recoil pad absorbs a portion of the recoil energy, reducing the impact felt by the shooter, while a muzzle brake redirects gases to counteract the recoil force.

Regular practice with the rifle can also help shooters adapt to the recoil and improve their handling skills. Adjusting the shooting stance and grip can significantly improve control over the rifle during firing.

8 . Loose Stock


A loose stock in a Savage 110 Storm can be attributed to several reasons. 

One of the most common causes is the natural expansion and contraction of the materials used in the construction of the firearm. 

This is typically due to changes in temperature and humidity, leading to the loosening of the stock over time. Another frequent cause can be traced back to the wear and tear that the firearm undergoes with regular usage.


A loose stock is a common issue that can be easily addressed with the right approach. The first step in remedying this problem is identifying the loose components and tightening them up.

 If these components are worn out, replacing them with new parts is the next advisable step. 

Should the issue persist despite these measures, it might be necessary to seek the assistance of a professional gunsmith who can accurately diagnose and fix the problem. 

The key to preventing loose stocks in the future lies in regular maintenance and appropriate storage conditions.

9 . Barrel Overheating


The overheating of the Savage 110 Storm barrel is typically caused by the rapid and continuous firing of bullets. 

Excessive heat build-up from the bullet friction against the barrel can cause the barrel metal to expand, potentially leading to a decrease in accuracy or, worse, a catastrophic failure of the firearm.


Addressing the overheating issue requires both preventive and rectifying measures. 

Regular cleaning and proper lubrication of the barrel can significantly reduce friction, hence the heat generated. Furthermore, allowing the barrel to cool down between shooting sessions is paramount. 

In extreme cases, installing a heat shield or switching to a heavier barrel can help disperse the heat more effectively, thus minimizing overheating risks.

10 . Complicated Disassembly


The Savage 110 Storm’s complicated disassembly primarily stems from its design intricacies that are intended for experienced users or professionals. 

It involves an interplay of numerous small parts which could be easily misplaced or improperly reassembled.

The unforgiving nature of its disassembly process leaves little room for error, which can exacerbate the problem for novice users.


To resolve this, it is recommended to follow a step-by-step guide or video tutorial when disassembling the Savage 110 Storm. 

This ensures that each part is removed and later reassembled in the correct order. Having a diagram of the arrangement of the parts can also prove invaluable

For those still struggling with the process, it might be worthwhile to seek assistance from a professional gunsmith.

 Professional help guarantees proper handling, thus minimizing the risk of damage to the rifle.

11 . Difficulty in Adjusting the AccuFit System


The AccuFit System on the Savage 110 Storm allows for a customized fit, but users often struggle with adjusting it due to its intricate design and lack of clear instructions. 

The difficulty is primarily associated with understanding the mechanism, aligning the components correctly, and using the correct tools for adjustment.


To alleviate these issues, it’s essential to provide detailed, easy-to-understand instructions with each Savage 110 Storm sold. Users could benefit from step-by-step video tutorials that visually demonstrate the adjustment process. 

It’s also recommended to include the necessary tools within the package, ensuring users can make adjustments without the need to search for the correct equipment.

12 . Unreliable Safety Mechanism


The unreliability of the Savage 110 Storm’s safety mechanism may result from wear and tear over time, improper maintenance, or faulty manufacturing. 

Over time, the safety may become loose and fail to securely lock the firearm, posing a serious safety risk. 

Poor maintenance can exacerbate this issue by allowing dirt and grime to accumulate, potentially interfering with the mechanical operation.


The solution lies in regular inspection and proper maintenance of the safety mechanism. If the issue persists despite these measures, it may be necessary to replace the mechanism entirely. 

A qualified gunsmith should be consulted for such replacements to ensure the gun’s safety features are correctly installed and functioning. Always remember: a reliable firearm is a maintained firearm.

 Regular inspections and cleaning can help to identify potential problems early, prevent further damage, and ensure your safety.

13 . Inconsistent Feeding from Magazine


The root cause of inconsistent feeding from the magazine in a Savage 110 Storm typically lies in the magazine spring tension. 

The magazine spring needs to be adjusted correctly in order for the rounds to feed properly into the rifle’s chamber.


To address this issue, you should inspect and adjust the magazine spring tension of your Savage 110 Storm rifle following these steps:

  1. Unload your gun – Make sure all ammunition is removed prior to any inspection or maintenance.
  2. Remove the magazine – Unscrew the front retaining screw and pull out the magazine from the bottom of your gun’s stock.
  3. Inspect the spring tension – With a flashlight, inspect all components of your magazine assembly including the carrier, base plate, spring guide, spring, and follower.

14 . Hard to Clean Bolt Face


The primary issue with the Savage 110 Storm bolt face being hard to clean is the intricate design and construction. 

Accumulated grime, dust, and residues can easily get lodged in the bolt face’s crevices, making it challenging to reach and remove without dissembling the components. 

This complexity can be daunting and time-consuming for most users, leading to improper maintenance.

The intricate design makes it hard to clean the bolt face. Accumulated grime easily gets lodged in crevices. This complexity can be daunting and time-consuming.


The best solution to this problem is to invest in a specialized cleaning kit designed for bolt faces. 

These kits often contain miniature brushes and cleaning solvents capable of loosening and removing stubborn grime.

Using a light to visually inspect the bolt face before and after cleaning can also be very helpful. Remember, regular maintenance helps prevent buildup and ensures the longevity of your firearm.

Invest in a specialized cleaning kit designed for bolt faces. Use a light to inspect before and after cleaning. Regular maintenance helps prevent buildup.

15 . Frustrating Scope Mounting


The most common issue users face with the Savage 110 Storm scope mounting is alignment. 

The receiver holes for mounting the scope are often not aligned correctly, making it difficult to get the scope mounted securely.

 This is due to a manufacturing defect that causes the holes in the receiver to be slightly misaligned from each other.


Fortunately, there are some simple fixes for this problem. The first step is to use a mounting kit specifically designed for Savage 110 Storm rifles, such as the one offered by Accu-Shot. 

This kit comes with two mounting plates that fit perfectly on the receiver, and ensure that the scope can be mounted properly. 

Additionally, if you’re having trouble installing the scope due to misalignment, use a set of thread-locking screws to secure it in place and prevent further alignment issues.


While the Savage 110 Storm has proven to be a reliable and accurate rifle, it’s not without its issues. Some users have reported problems ranging from bolt operation to the adjustment of the AccuFit system. 

However, with regular maintenance and care, these issues can be managed effectively. Remember, every firearm model has its drawbacks; being aware of them helps you use the weapon more efficiently and safely

 Despite these minor issues, the Savage 110 Storm remains a highly recommended rifle for those seeking quality, accuracy, and outdoor resilience.


Is the Savage 110 storm good?

The Savage 110 Storm is indeed a good rifle recognized for its outstanding accuracy and durability, especially in tough outdoor conditions.

What is a Savage 110 storm?

The Savage 110 Storm is a versatile bolt-action rifle designed for sharp shooting and adaptability in diverse weather conditions.

How accurate is a savage rifle?

Savage rifles are highly accurate, with precision craftsmanship and innovative features that enhance their shooting performance.

Is the Savage 110 good for hunting?

Yes, the Savage 110 is excellent for hunting, thanks to its accuracy, reliability, and adaptability to various environmental conditions.

Savage 110 Storm Problems

Why Is an AK 47 So Dangerous

Savage 110 Ultralight Problems

Savage msr 10 Hunter problems

Savage Msr 10 Long Range Problems

Savage 17 Hornet Problems

Savage 17 WSM problems

Savage A22 magnum problems

Savage 110 High Country Problems

Colt Defender 45 Problems

Shadow Systems MR920 Problems

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top